Wednesday 28 November 2012

Hermes 3000 1969 - Achilles






13 comments:

  1. Too bad about that knob. This seems like a perfect job for 3D printing.

    ReplyDelete
  2. This little fella does need some adjustment. When I get round to retrieve my Hermes 3000 from The Archive, I will have a look and try to find out. To ease the impact of granite platens, I recommend using two or three sheets of paper as quick-aid measure.

    ReplyDelete
  3. 5 pound? That's a Score!

    Richard just reminded me... I was designing a 3D printed replacement for these. How time flies... I'll get to it soon.

    Have fun with this machine. And yeah, two sheets to the wind, my friend. Two sheets.

    ReplyDelete
  4. Nice typewriter. I need to check mine, but if I recall there are 2 adjustment screws to move the carriage in/out.

    At one time I was going to build a 3-D printer. Then I found out the cost of the printing material (plastic compound).

    ReplyDelete
  5. Thanks for suggestions everyone, and for the offer, Bill. Watch this space.

    ReplyDelete
  6. There's a guy on ebay who sells a plastic model making compound. It comes in two liquids which when mixed solidify. I've bought some to make a knob for one of my Oliver twos. It might work for you, too. You could make a silicone mold of the remaining platen knob and pour the compound into that to make your knob.

    ReplyDelete
    Replies
    1. Thanks Martin. Funnily enough, that type of solution had occurred to me but I currently have my sights set on a wooden door knob which might just do the trick with a little drilling, whittling and glueing

      Delete
  7. This comment has been removed by the author.

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Rollo, there may be 3rd part knobs available. But this solution worked for me: http://typewriterheaven.blogspot.co.uk/2012/12/hermes-knob-solution.html

      Delete
  9. My Hermes knob did the same thing - Other that that it is in mint condition. Are there replacement knobs available - If so please contact me so I can order one, Thanks a lot. Rollo

    ReplyDelete